Building consents
Residential building consents in Saint Kilda
Below: 244 residential consents we hold in Saint Kilda, searchable and on the map.
Residential consents on record in Saint Kilda
Individual building consents we hold, each on its property: 244 from 1 Mar 2013 to 1 Aug 2026. Councils publish their records unevenly, so these are what we have, not every consent issued — for the full count, see the official figures above.
What the work is
Consents in the last five years by the kind of work their description names.
- Fires and heating47
6 in the last 12 months · typically $5,000
- Alterations and additions24
2 in the last 12 months · typically $27k
- Multiple homes20
typically $637k
- New homes11
typically $572k
- Plumbing, drainage and wastewater9
1 in the last 12 months · typically $15k
- Garages, sheds and carports5
2 in the last 12 months · typically $14k
- Minor dwellings and sleepouts3
typically $25k
- Other new buildings2
typically $400k
- Relocated buildings1
1 in the last 12 months · typically $60k
- Insulation1
typically $24k
Consents on record by month
The last three years. A recent dip is often records still to arrive.
Largest in the last 12 months
- $60kRelocation of existing dwg - foundations, wastewater system, & new gge 17 Marlow Street
- $35kRemove wall in dwg to extend bathrm, install toilet & wall bracing 72 Moreau Street
- $15kRemove wall between kitchen & dining room of dwg 61 Calder Street
- $10kErect gge 17 Council Street
- $10kErect gge 17 Council Street
244 consents
- Fires and heating$5,000
Install solid fuel burner in dwg
- Relocated buildings$60k
Relocation of existing dwg - foundations, wastewater system, & new gge
- Plumbing, drainage and wastewater$35k
Remove wall in dwg to extend bathrm, install toilet & wall bracing
- Garages, sheds and carports$10k
Erect gge
- Garages, sheds and carports$10k
Erect gge
- Alterations and additions$15k
Remove wall between kitchen & dining room of dwg
- Fires and heating$5,000
Install solid fuel burner in dwg
- Fires and heating$8,000
New woodsman Tasman mkii with heatsaver flue kit o
- Fires and heating$5,000
Install solid fuel burner in dwg
- Fires and heating$4,000
Install woodsman Brunner mkii heater in dwg
- Fires and heating$8,000
Install maxen kinmont 450-w heater in dwg
- Alterations and additions$5,000
Replace shower with wet-area shower in dwg
- Alterations and additions$20k
Install wetfloor shower in laundry of dwg
- New homes$210k
New dwg
- Fires and heating$7,000
Install metro r1 heater in dwg
- Fires and heating$5,000
Install maxen kinmont 350-p heater in dwg
- Fires and heating$4,000
Install yunca xander insert heater in dwg
- Fires and heating$4,000
Install kent Ruapehu heater in dwg
- Fires and heating$7,000
Install metro wee rad leg heater in dwg
- Multiple homes$710k
Erect two attached dwgs
- Alterations and additions$100k
Amendment to aba-2015-1002 - extend & alt dwg, replace part foundations, enlarge living, enclose porch to form laundry & pantry, delete woodsman flare heater
- Alterations and additions$150k
Stage 1 - site prefabricated dwg - construct foundation
- New homes$596k
R2 - new two storey detached dwg on sed piles (aka unit 2)
- Alterations and additions$5,000
Alt dwg - remove wall & install beam to create open-plan kitchen, lounge & conservatory
- Fires and heating$6,000
Install maxen Forbury 550 heater in dwg
ResidentialCommercial The dots are this page of the list.
Near Saint Kilda
Questions
What is a building consent?
Written approval from a council (a building consent authority) that planned building work complies with the Building Code. Most new buildings, additions, structural alterations, fires and plumbing and drainage work need one; some minor work is exempt under Schedule 1 of the Building Act 2004.
Where do these figures come from?
The official counts are Stats NZ’s monthly Building consents issued release (CC BY 4.0), covering every consent every council issues. The individual consents listed are ones we hold from councils’ records and other public sources; they are not a complete list for every council.